Gasket in Sheet or Cut :
Type : Asbestos Gasket (Red, Black, Graphited)
Sheets :1.5m x 1.5m, Thickness: 0.5mm to 6mm
Flange cut Gasket Size : 1/2" to 20" & Thickness 1.5mm & 3mm
Few of our Products & features:
Asbestos Gasket (Red / Black / Graphited)
General Applications:
Low to medium loading, good resistance to water, steam, fuel & chemicals at moderate temperature and pressure.
Specific Properties:
IS 2712 / 1979 / 1998
Grade w/3
Operating conditions:
Maximum Internal Pressure: 35Kg/cm
Maximum Operating Temperature : 380 C or 716 F
Gasket in sheet or Cut:
Type : Non Asbestos Gasket (Green)
Sheets :1.5m x 1.5m, Thickness: 0.5mm to 6mm
Flange cut Gasket Size : 1/2" to 20" & Thickness 1.5mm & 3mm
Non Asbestos Gasket (Green)
Sheet 1.2m x 1.2m (0.5mm to 5mm)
Cut Gasket 1/2" to 24" (1.5mm or 3mm)
Synthetic Fiber (SBR/NBR)
Low to medium loading, good resistance to water, steam, fuel & chemicals at moderate temperature and pressure.
Tensile Strength MPa Din 52910: 7
Compressibility: %ASTM F36: 11
Recovery: %ASTM F37: 50
Thickness increase: ASRM A146
ASTM Oil No. 3 %: 15
ASTM Fuel B%: 15
Stress Relaxation DIN 52913
Temp: Max 325 deg C / 617 deg F
Pressure Bar: 70
Rubber Gasket in Sheet or cut :
Rubber Sheets in : Natural, Neoprene, Polyisoprene, Ethylene Propylene (EP)(EPM)(EPT)(EPDM), Nitrile
Type : Rubber (Plain or with Insertion) / Rubber With Insertion.
Sheets :1.2m x 18Kg, Length may vary based on thickness. ie: (2mm to 10mm)
Flange cut Gasket Size :1/4" to 8" & Thickness 3mm
High quality rubber with good finish.
Trust worthy for workmanship.
Has excellent flexibility & elasticity.
Excellent resilience to cold temperature
Good abrasion resistance
Low compression set,
Tensile with low water swell.
Good for steam if no oil present.
Poor in Heat, Oil, Fuel, Ozone & Solvent resistance.
Visit for more details:
Spiral Wound Gasket:
These spiral wound gaskets are precession engineered
1Packet has 10units of spiral wound gaskets.
Size: 1/2" to 24" & 50lbs to 1500 lbs
Note:
We can arrange for other than standard sizes also
once the order is placed along with advance.
Vacuum pump suitable for 6"miller type dewatering pump capacity 70 CFM
Scrolling Down for more Products?
Under construction.....